Like a motorcycle rider, we understand very critical it is that you keep the bike in good working condition. Proper maintenance not only provides a smooth and safe ride but also helps your bike live longer. Whenever it involves looking after a two-wheeler, then, it could be difficult to get started.
Therefore, we’ve put together a collection of 7 suggestions to help keep your bike working efficiently and looking fantastic. If you’re an expert rider or a first-time owner, these guidelines will help you keep your motorcycle in fine condition long years to come.
Now, let’s get started.
Check your oil level regularly
In being the oil level in your motorcycle is crucial to ensuring the durability and good health of the engine. Engine oil is in charge of lubricating the engine’s internal components and minimizing friction, which can ultimately lead to wear and tear.
Park your bike in a flat area, and make sure the engine is cold, before checking the oil level. Find the oil dipstick, which is often related to the performance of the engine or oil tank, and then take it out. Reinstall the dipstick in the engine or oil tank after cleaning it. Check your fluid levels on the dipstick by removing it once more. The dipstick’s high and low markings should correspond to the oil level.
If the oil level is low, fill it off as the manufacturer suggests before checking the level again. The oil needs to be changed if it seems dirty or smells burned. Regular oil changes may keep your motorcycle running smoothly and help avoid engine problems.
Keep your tires properly inflated
It’s critical to keep your two-tire wheelers inflated properly for both safety and performance. Tires that are under or over-inflated can lead to a number of issues, including poor handling, reduced mileage, and higher tyre wear and tear.
Are using a tyre pressure sensor to determine the air pressure inside your tyres in order to check their pressure. To find out recommended tyre pressure for your motorcycle, see the owner’s handbook. With a tyre pump or an air compressor, inflate your tyres to the required pressure.
At least once every week, or before each long ride, check the pressure in your tyres. Moreover, look for any obvious evidence of damage, such as cuts or punctures, and change the tyre if required. Maintaining optimum tyre pressure will increase the handling and safety of your motorcycle, cut down on fuel use, and prolong the life of your tyres.
Clean your bike regularly
Maintaining the aesthetic and functionality of your motorcycle requires routine cleaning. A bike’s chassis and engine can gather dust, filth, and grime over time, decreasing performance and increasing corrosion.
Start by giving your bike a good washing to get clear of any loose grime and dirt. Finally, wash the body and engine with water and a light detergent, taking care not to get any of the electrical components dirty. Scrub away any tenacious filth with a soft-bristled brush or sponge, and then give the area a thorough rinsing.
To avoid water marks developing, dry your bike with a clean cloth or towel after washing. To preserve its paint & keep your bike looking fresh, treat it with wax or shine. The performance and appearance of your bike may be enhanced by cleanings, which may additionally avoid rust and reduce wear and tear. Normally, you should clean your bike once per month, or more routinely if you regularly ride in soiled or dusty conditions.
Lubricate your bike’s chain
The drivetrain of your two-chain wheeler is a key component, and it has to be lubricated frequently to operate smoothly and effectively. A chain that is too dry or insufficiently oiled can result in excessive wear and tear, impact the performance of your bike, and possibly damage related bike components.
Clean your chain with a chain cleaner as well as a brush to get rid of any debris before lubricating it. Finally, lubricate the chain’s rollers using a high-quality chain lubricant, and take care to keep the sprockets and other components of the bike out of the way. To remove any extra lubrication, use a cloth.
Every 500–1000 km, or more frequently if your ride in mud or dusty conditions, you should lube your chain. For the greatest results, use a chain lubricate that is specially made for the chain on your bike and adheres to the manufacturer’s instructions. Your two-drivetrain wheelers will last longer, operate better, and experience less wear and tear if you maintain your chain greased.
Check your brakes regularly
Your two-brake wheelers are a key component of safety, and you should keep checking and maintaining them to make sure they are working properly. Defective brakes may be risky, leading to accidents and harming the rider and spectators.
Start by looking for wear and tear on the brake pads while checking your brakes. Replace the pads right away if they are worn out. After that, make sure the brake fluid level is at the appropriate level by checking it. Fill it up with the required brake fluid if the fluid level is low.
In order to look for any problems, check your brakes additionally by applying little pressure at first and increasing steadily them. Have the brakes checked out and repaired by a qualified mechanic if you hear any strange noises or think they are not functioning properly.
Every 6 months or as recommended by the manufacturer, you should have a competent mechanic check your brakes. The safety of the rider and other drivers on the road can be improved with regular brake maintenance.
Maintain your battery
The battery is a crucial component of your two-electrical wheeler’s system, and it must be serviced on a regular basis to guarantee proper operation. A dead or weak battery might create starting issues, impacting the performance and dependability of your bike.
To maintain your battery, first, check the electrolyte level and, if required, replenish it with distilled water. Finally, examine the battery terminals for corrosion and clean them with a wire brush if necessary. To prevent corrosion, you can also use a battery terminal protectant.
This is suggested that you remove the battery & store it in an appropriately cool, dry area if you won’t be riding your bike for a long time, as in the winter. As an alternative, you may maintain the battery’s health and charge by keeping it plugged into a trickle charger or battery tender.
Battery maintenance on a regular basis can help it last longer and reduce starting issues. For maximum performance, check your battery as often as recommended by the manufacturer or every few months.
Check your air filter
Your two-air wheeler’s filter is a crucial part of the engine, therefore it has to be regularly inspected and cleaned to make sure it’s functioning properly. The engine’s performance and fuel economy might be impacted by a clogged or filthy air filter that restricts airflow to the engine.
Remove the air filter from the bike and look for any obvious stains or damage to examine it. Clean the filter with a gentle brush or compressed air if it is soiled or blocked. Replace the filter with a new one if it has been harmed or worn out.
Every few months or as directed by the manufacturer, you should check your air filter. The performance, fuel economy, and engine life of your motorbike may all be improved with routine air filter cleaning.
Finally, maintaining your two-wheeler in good condition is essential for guaranteeing its safety, dependability, and performance. These seven suggestions, which also include regularly checking your oil level, lubricating your chain, and checking your brakes, will help keep your bike working smoothly.
By complying with these recommendations, you may avoid major problems and extend the life of your bike. Remember that maintaining your two-wheeler is important not only for your bike but also for you. Hence, use these tips to ensure that you have many many safe and fun travels in the future.